The ADJUST-A-VAC was developed as a result of customer concerns about manual handling of very thin/delicate substrates, wafers, MEMS devices and other very fragile components. This vacuum-tweezer allows the operator to adjust the vacuum level from just below atmospheric pressure to up to ten inches of mercury depending on the fragility of the part being handled. With 8″ Wafer Tip.
The ADJUST-A-VAC was developed as a result of customer concerns about manual handling of very thin/delicate substrates, wafers, MEMS devices and other very fragile components. This vacuum-tweezer allows the operator to adjust the vacuum level from just below atmospheric pressure to up to ten inches of mercury depending on the fragility of the part being handled. An integrated ten-segment bar-graph display visibly shows the vacuum level during handling operations.
The bar graph will show minimum vacuum pressure until a part is grasped — once contact is made, it displays the vacuum level presented to the part being handled. Additionally, the vacuum port integrates a user-replaceable inlet filter that protects the tool from dust particles. This Vacuum Tweezer is available in various kits depending on your handling application, in 110 or 220 volt operation.
This ESD safe Kit Includes:
| Vacuum hose | 5 feet, coiled |
| Indicators | Bar graph power-on and vacuum-level indicator |
| Vacuum level | Adjustment knob — up to 10 inches of Mercury (Hg) at sea level |
| ESD grounding | Three-wire power cord |
| Stability | Rubber no-skid feet |
| Included | Wafer wand and wafer tip |
Note: Other models available with different tip sizes.
